My ZX Evo purchase and update to TSConf

... и др.

Postby chernandezba » Fri, 06.04.2018 09:45:07

Hi!

Finally received my ZX Evo yesterday :) I even updated to TSConf and tried some demos/games.
I had a "panic" moment (indeed, two hours) when I didn't succeded installing TSConf and (I Think) I had the TSConf rom updated but the old firmware...
Anyway, I could update it using the boot recovery process (pressing reset when powering on); I think a very advanced feature, the way you can recover it...

You can see some photos / videos on my Twitter account
https://twitter.com/zesarux

And on my FB account (ZEsarUX group)

Cheers
Attachments
DaDbZ_DXUAAK3b3.jpg
TSConf bios
DaDbIkqW4AEpe0F.jpg
Test firmware
----

ZEsarUX
ZX Second-Emulator And Released for UniX
https://github.com/chernandezba/zesarux
chernandezba
 
Posts: 136
Joined: Wed, 28.06.2017 17:50:12

Postby VBI » Fri, 06.04.2018 10:22:44

Cool! Welcome to the Club!
and, so about TS Config Net? :D
User avatar
VBI
 
Posts: 1965
Joined: Mon, 03.06.2013 09:20:29

Postby chernandezba » Fri, 06.04.2018 10:56:05

VBI wrote:Cool! Welcome to the Club!
and, so about TS Config Net? :D


I saw the ZiFi module, but I'm not sure if I have to solder something on the board and where I have to plug it....
----

ZEsarUX
ZX Second-Emulator And Released for UniX
https://github.com/chernandezba/zesarux
chernandezba
 
Posts: 136
Joined: Wed, 28.06.2017 17:50:12

Postby chernandezba » Fri, 06.04.2018 11:03:33

Saw some info here:
http://hype.retroscene.org/blog/382.html

So it only has to be connected to the "X14. AVR JTAG for ATMEGA128" connector?
That connector is for "Connector for programming ATMEGA128 via JTAG ICT". Why the Wifi module has to be plugged there?
----

ZEsarUX
ZX Second-Emulator And Released for UniX
https://github.com/chernandezba/zesarux
chernandezba
 
Posts: 136
Joined: Wed, 28.06.2017 17:50:12

Postby VBI » Fri, 06.04.2018 11:56:20

dont read this shit. :lol:

please check this post and topic
Zifi inserted in port Х5
User avatar
VBI
 
Posts: 1965
Joined: Mon, 03.06.2013 09:20:29

Postby chernandezba » Fri, 06.04.2018 12:05:18

VBI wrote:dont read this shit. :lol:

please check this post and topic
Zifi inserted in port Х5


Hehe thanks! It seems easy. But should I cut 1 pin of the wifi board, to receive 5V instead as 12V? As seen on the photo...
----

ZEsarUX
ZX Second-Emulator And Released for UniX
https://github.com/chernandezba/zesarux
chernandezba
 
Posts: 136
Joined: Wed, 28.06.2017 17:50:12


Return to Other

Who is online

Users browsing this forum: No registered users and 0 guests

cron

x