soviet wrote:show some white lines on the screen i have to press cc+ctrl+alt+f12 to go to the firmware changing is very confusing to go to base conf i have to hold 0
soviet wrote:other question the beta firmware on base conf let you change the screen timing from 60 hz to 48k 128k pentagon etc and the one provided on ts-conf only work for 60 hz.
F12 - reset
lshift+F12 - альтернативный reset (только для ts-conf)
rshift+F12 - вход в ts-bios (только ts-conf)
ctrl+alt+F12 - переключение между прошивками (base/ts-conf)
ctrl+alt+F11 - переключение в pong конфу
MENU + F1 - перекидывание бита0 выбора физического дисковода (только для ts-conf)
MENU + F2 - выбор источника 1-битной хрипелки (бипер / тейп-аут / тейп-ин) (только для ts-conf)
MENU + F3 - переключение 50/60Гц (только для base)
MENU + F4 - переключение полярности синхры (только для ts-conf)
Scroll Lock - переключение TV/VGA развертки (на ts-conf оная подаётся на оба источника сразу)
soviet wrote:What key is MENU ?.
soviet wrote:i have the same problem on scl just do enter over the file on wild commander choose (scl as ram disk:) drive A enter OK then reset to TR-DOS.
soviet wrote:I can browse the mounted image inside wild commander ?
TS-Labs wrote:soviet wrote:show some white lines on the screen i have to press cc+ctrl+alt+f12 to go to the firmware changing is very confusing to go to base conf i have to hold 0
Letterstream parse error. Describe it in more details plz.soviet wrote:other question the beta firmware on base conf let you change the screen timing from 60 hz to 48k 128k pentagon etc and the one provided on ts-conf only work for 60 hz.
Here functional keys (somewhat differ from original Baseconf):F12 - reset
lshift+F12 - альтернативный reset (только для ts-conf)
rshift+F12 - вход в ts-bios (только ts-conf)
ctrl+alt+F12 - переключение между прошивками (base/ts-conf)
ctrl+alt+F11 - переключение в pong конфу
MENU + F1 - перекидывание бита0 выбора физического дисковода (только для ts-conf)
MENU + F2 - выбор источника 1-битной хрипелки (бипер / тейп-аут / тейп-ин) (только для ts-conf)
MENU + F3 - переключение 50/60Гц (только для base)
MENU + F4 - переключение полярности синхры (только для ts-conf)
Scroll Lock - переключение TV/VGA развертки (на ts-conf оная подаётся на оба источника сразу)
TS-Labs wrote:Still valid, but changes will follow.
MENU + F4 will be removed soon.
And I plan to remove BaseConf from ATmega firmware.
TS-Labs wrote:Because "so said EVELYN the modified DOG".
TS-Labs wrote:This is the phrase from SDCC Z80 which annoys me a lot. Which probably means that authors decided so and they are too lazy to explain why.
chernandezba wrote:It's a shame. I think it will be great to preserve both tsconf and baseconf on the same dual boot
Users browsing this forum: No registered users and 1 guest